High-roubustness keystroke recognition method based on acoustic spatial gradient

For the fluctuation of CFCC caused by environmental noise is the main reason for the low accuracy of keystroke detection,the spatial characteristics of adjacent between CFCC were studied,and the spatial gradient structure of CFCC based on points was established.On this basis,the effect of CFCC spatial gradient on keystroke content recognition and the selection of precise neighborhood points were studied on training and testing.Finally,a high-robustness keystroke recognition algorithm based on acoustic signals was constructed.Extensive experiments in different environments demonstrate that the proposed CFCC spatial gradient sound feature achieves great performance and the recognition accuracy is 96.15%.     

金属增材制造技术研究热点聚类分析

为深入分析金属增材制造技术分类和发展状况,采集中国期刊全文数据库(CNKI)收录的核心期刊上的768篇科技文献,借助文献分析可视化软件CiteSpace,对关键词聚类进行了全景式描绘,构建金属增材制造技术知识图谱,揭示该技术研究分类以及演化趋势。     

井下供电监控及防越级跳闸系统运用分析

以井下供电监控及防越级跳闸运用为对象开展探究。在分析矿井供电系统运行中现存主要问题的基础上,对供电监控与防越级跳闸系统整体应用的积极意义进行了分析和总结,希望能够让更多矿井技术人员了解供电监控及防越级跳闸系统的优越性,为其在矿井中的广泛推广普及提供便利,为煤矿行业更加高效地发展提供帮助。     

Polynomial filtering for nonlinear stochastic systems with state‐ and disturbance‐dependent noises

This article is concerned with the polynomial filtering problem for a class of nonlinear stochastic systems governed by the Itô differential equation. The system under investigation involves polynomial nonlinearities, unknown‐but‐bounded disturbances, and state‐ and disturbance‐dependent noises ((x,d)‐dependent noises for short). By expanding the polynomial nonlinear functions in Taylor series around the state estimate, a new polynomial filter design method is developed with hope to reduce the conservatism of the existing results. In virtue of stochastic analysis and inequality technique, sufficient conditions in terms of parameter‐dependent linear matrix inequalities (PDLMIs) are derived to guarantee that the estimation error system is input‐to‐state stable in probability. Moreover, the desired polynomial matrix can be obtained by solving the PDLMIs via the sum‐of‐squares approach. The effectiveness and applicability of the proposed method are illustrated by two numerical examples with one concerning the permanent magnet synchronous motor.     

An efficient method of generating vortex electromagnetic wave based on double‐layer transmissive metasurface

A broadband double‐layer transmissive metasurface (TMS) for effective generate vortex electromagnetic wave is presented in this paper. The proposed TMS consists of two types of elements. The first element is composed of a multi‐resonant dipole and four metal vias. The metal vias increase the coupling strength between the upper and lower layers to improve transmission efficiency. On the basis of the first element, the second element adds stubs to ensure sufficient phase shift. The far‐field cross polarisation is eliminated by special element arrangement. Then, a centre‐fed linear polarisation TMS is designed to generate orbital angular momentum beams with mode l = ? 1. The proposed TMS is designed, manufactured and measured to verify the proposed design. The measured results indicate that a maximum gain of 20.8 dBi and narrow divergence angle of ±5° are achieved at 18 GHz. Furthermore, mode purity is higher than 86.1% within the 17 to 19 GHz band. The proposed double‐layer TMS saved costs, reduced weight and without assembly error is a good candidate for OAM generator.     

ASME Ⅱ卷D篇表U数据作为设计校核中材料验收标准存在问题及探讨

ASME标准钢板对于短时高温抗拉数据无规定,但设备设计人员在校核时又要用到此数据,于是有些设计文件在技术要求中将ASME II卷表U的数据作为材料验收的标准。针对此种做法引发的争议及涉及的主要问题进行试验验证和分析探讨。研究结果表明,ASME II卷D篇表U中的数据是基于室温抗拉强度保证值,并根据拟合曲线将室温保证值提高了10%得到的,实测数据与ASME规范数据不一致,部分材料在250~350℃存在动态应变时效现象,但仍不满足设计要求。材料经模拟焊后热处理后性能下降,难以到达交货态的要求。给出了短时高温抗拉强度的选用建议。     

基于改进型巴特勒矩阵的短波8元圆环阵列多波束技术研究

传统短波接收天线为单一的波束指向天线或全向天线。为提高接收天线增益,同时产生多个波束指向不同方向,提出利用巴特勒矩阵作为短波接收天线阵的无源波束形成网络。在传统8×8巴特勒矩阵结构的基础上,设计改进型8×8巴特勒矩阵。以均匀8元圆环阵列为天线模型,利用FEKO仿真分析了其天线特性。在3~11 MHz频段内,P2、P3、P6、P7四个端口分别在202.5°、292.5°、112.5°、22.5°方向上得到了方向性较强的单一波束,7 MHz时波束增益达到最大11.9 dBi,波瓣3 dB宽度平均为60°;在P1、P4、P5、P8端口产生相同的2个波瓣,7 MHz时其波束增益达到最大9.8 dBi,波瓣3 dB宽度平均为89°。由以上仿真分析得出,该改进型8×8巴特勒矩阵能够同时产生6个波束,波束覆盖8个方向,提高了波束的方向性,提高了天线增益。     

天然橡胶/顺丁橡胶/丁苯橡胶自润滑喷蜡橡胶材料的性能

在天然橡胶(NR)/顺丁橡胶(BR)/丁苯橡胶(SBR)为基体的自润滑喷蜡橡胶材料中加入芥酸酰胺,考察芥酸酰胺作为润滑剂时对NR/BR/SBR自润滑喷蜡橡胶材料的硫化特性、力学性能、门尼黏度、摩擦系数及耐老化性能的影响。结果表明,与未加芥酸酰胺的胶料相比,当芥酸酰胺用量为10份时,胶料转矩减小,焦烧时间和正硫化时间缩短,扯断伸长率从388%增加至523%,拉伸强度降低了21.36%,邵尔A硬度、压缩永久变形分别下降5.56%和8.74%,动、静摩擦系数分别减小23.46%和24.82%,门尼黏度降低20.89%,耐热氧老化性能下降。硫化胶拉伸100%停放5 min后,表面出现明显的白色润滑膜,胶料流动性变好,各组分分散得更均匀,断面更光滑。     

薄煤层中垂直裂缝地震响应特征模拟分析

通过定义一个简单的薄煤层模型,在不断增加煤层中垂直裂缝数量的条件下,利用基于分裂节点的有限元数值方法模拟了含有不同条数裂隙煤层的地震反射波场;通过与不含裂缝、各向同性薄煤层反射的多波波场对比分析发现:裂缝的存在会对煤层的反射产生影响,但裂缝密度低时影响微弱,裂缝密度增加到一定程度后会出现类似调谐作用的反射能量干涉加强;裂缝密度进一步升高,对煤层反射的影响主要反映在高频成分的增加,对振幅影响较弱,说明煤层的反射强度主要受薄层的干涉作用影响较大;从理论地震波场分析的角度证明了薄煤层含裂缝的不可忽视性及反演的可能性。     

Inhibition of stress corrosion cracking in 304 stainless steel through titanium ion implantation

The effects of titanium ion implantation on the stress corrosion cracking (SCC) behaviour of 304 austenitic stainless steel were studied. Slow strain rate tests (SSRTs) were conducted on 304 steel in air and in 5?wt-% NaCl solution. The microscopic effects of ion implantation were evaluated by Stopping and Range of Ions in Matter Procedures (SRIM). Fracture morphologies and microstructures were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The fracture surfaces illustrate that ion implantation significantly inhibits the corrosion pits that initiate SCC. A dense passive film, which inhibits SCC, was formed during the ion implantation process. SCC initiation was restrained due to the dense dislocation nets that were generated by titanium ion implantation.

Highlights

• Ion implantation inhibits SCC susceptibility.

• The lack of Cr at the grain boundary leads to the expansion of SCC along the grain boundary.

• Implantation-induced damage leads to high-density dislocations.

• The surface was amorphised due to high-density dislocations.